Table of Contents
Advertisement
SCSI Interface Product Manual, Rev. B
If any of the following conditions occur, this command shall be terminated with a CHECK CONDITION status
and the Sense Key shall be set as indicated in the following table. This table does not provide an exhaustive
enumeration of all conditions that may cause the CHECK CONDITION status.
Condition
INVALID LOGICAL BLOCK ADDRESS
TARGET RESET SINCE THE LAST COMMAND
FROM THIS INITIATOR
Note.
The extended sense information bytes shall be set to the LOGICAL BLOCK ADDRESS of the first
invalid address.
Sense Key
VOLUME OVERFLOW (see note)
UNIT ATTENTION
315
Advertisement
Table of Contents
