Time Search - JVC UX-G48 Instructions Manual

4 Select the repeat mode you want.
A-B Repeats a desired portion (see below).
TITLE* Repeats the current title.
ALL Repeats the disc (not applicable for
DVD) or programmed track.
CHAPTER** Repeats the current chapter.
TRACK** Repeats the current track.
OFF Cancels Repeat Play.
* While playing a DVD-VR, "PG" appears, and while
playing a Play List, "PL" appears.
** During Program Play and Random Play, "STEP"
appears.
5 Finish the setting.
ENTER/SET
A-B Repeat
• See also page 22.
1 While playing, display the entire on-screen bar.
2 Select .
OFF
3 Display the pop-up window.
Dolby D
TITLE
DVD-VIDEO
3/2.1ch
TIME OFF CHAP.
TIME OFF
OFF
4 Select "A-B."
TV CH
TV CH
5 Select the start point (A).
ENTER/SET
DVD-VIDEO
TIME TIME
6 Select the end point (B).
A-B Repeat starts. The selected
ENTER/SET
portion plays repeatedly.
• Before pressing ENTER/SET, you
can search for the end point using
¡
the
To cancel A-B Repeat, repeat steps 1 to 3, and select "OFF"
in step 4.
25
14 23 TOTAL TOTAL 1:01:58 1:25:58
TITLE 2 CHAP CHAP 3
1/3 1/3 1/3
1/3 1/3 1/1
Dolby D
T
DVD-VIDEO
3/2.1ch
TIME OFF CHAP.
TIME OFF
A–B
Dolby D
TITLE TITLE 2 14 CH
3/2.1ch
1/3
A- CHAP. 1/3
button.

Time Search

You can move to a particular point by specifying the elapsed
playing time from the beginning.
• This function is not available during Program Play and
Random Play.
1 While playing (without PBC for SVCD/VCD), display
the entire on-screen bar.
• Time Search can also be used before starting playback
(not applicable for DVD Video/DVD-VR).
2 Select .
3
Display the pop-up window.
Dolby D
DVD-VIDEO
3/2.1ch
TIME TIME OFF OFF
TIME _ : _ _ : _ _
4 Enter the time.
You can specify the time in hours/minutes/seconds.
DIMMER SLEEP A.STANDBY
1
2
3D P/HP S C.VOICE CLOCK/TIMER
4 5
ZOOM ANGLE SCAN MODE
7 8
CANCEL
0
• It is always required to enter the hour digit (even "0"
hours), but it is not required to enter the final zeros (the
last two digits in the examples above).
• To correct a mis-entry, press < to erase the last entry.
5 Confirm your entry.
ENTER/SET
C
TIME 0:00:58
TITLE TITLE 2 14 CHAP CHAP 3 23 TOTAL
1/3 1/3
CHAP. 1/3 1/3
Examples:
To move to a point of 1
3
(hours): 02 (minutes): 00
6
(seconds), press 1, 0, 2, 0, then
0.
9
To move to a point of 54
(minutes): 00 (seconds), press
0, 5, 4, 0, then 0.
The System starts playing the disc
from the selected playing time.
1:25:58
1/3
1/1