Cisco UCS 5108 Spec Sheet page 37

Supported 2-CPU card adapter combinations are shown in
Table 20 Supported Mezzanine Adapter Combinations (2-CPU Configuration)
Adapter in
Adapter in VIC
Mezzanine
1240 Connector
Slot 1
VIC 1240 Not populated Not populated
VIC 1240 Not populated VIC 1280
VIC 1240 Not populated Cisco-certified
VIC 1240 Port Expander
Card for VIC
1240 3
Not populated Not populated Cisco-certified
VIC 1240 Port Expander
Card for VIC
3
1240
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual
interfaces into a group to provide increased bandwidth and redundancy. Port channeling also load balances
traffic across these physical interfaces. The port channel stays operational as long as at least one physical
interface within the port channel is operational. Cisco-certified adapters suppled by third-party vendors do
not support port channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for use
in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
3. Only the Port Expander for VIC 1240 is functional in mezzanine slot 1 in 2-CPU configurations
4. The 2104XP fabric extender is not compatible with any adapter installed in mezzanine slot 1
The general connectivity diagrams between the card adapters and the different fabric extenders are shown
in Figure 21 on page 38
Cisco UCS 5108 Blade Server Chassis
Adapter in
Mezzanine Slot 2
mezzanine adapter
Not populated
mezzanine adapter
VIC 1280
through Figure 23 on page
Table 20.
Total Available Bandwidth
2 x 2208XP 2 x 2204 XP
40 Gb
120 Gb
60 Gb
2
80 Gb
20 Gb
160 Gb
39.
SUPPLEMENTAL MATERIAL
1
2 x 2104 XP
20 Gb 20 Gb
60 Gb 40 Gb
40 Gb 40 Gb
40 Gb
Not supported
20 Gb 20 Gb
80 Gb
Not supported
4
4
37