Cisco UCS 5108 Spec Sheet page 32

SUPPLEMENTAL MATERIAL
For the B200 M3 blade server, supported card adapter combinations are shown in
Table 18 Adapter Card Options
Fabric
Extender Adapter in VIC 1240 Connector Adapter in Mezzanine Connector
Compatibility
2208XP
2208XP VIC 1240
2208XP VIC 1240
2208XP VIC 1240
2208XP VIC 1240
2208XP None
2204XP
VIC 1240
2204XP
VIC 1240
2204XP
VIC 1240
2204XP
VIC 1240
2204XP
None
2204XP
2104XP
2104XP VIC 1240
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual
interfaces into a group to provide increased bandwidth and redundancy. Port channeling also load balances
traffic across these physical interfaces. The port channel stays operational as long as at least one physical
interface within the port channel is operational. Cisco-certified adapters suppled by third-party vendors do
not support port channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for use
in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
3. The 2104XP fabric extender is not compatible with any I/O card installed in the mezzanine connector.
The general connectivity diagrams between the adapter cards and the different fabric extenders are shown
in Figure 17 on page 33
32
through Figure 19 on page
None
VIC 1280
Cisco-certified mezzanine adapter
Port Expander Card for VIC 1240
Cisco-certified mezzanine adapter
None
VIC 1280
Cisco-certified mezzanine adapter
Port Expander Card for VIC 1240
Cisco-certified mezzanine adapter
None 3
34.
Cisco UCS 5108 Blade Server Chassis
Table 18.
1
Ports
4 x 10 Gb
8 x 10 Gb
6 x 10 Gb
2
8 x 10 Gb
2 x 10 Gb
2 x 10 Gb
4 x 10 Gb
4 x 10 Gb
4 x 10 Gb
2 x 10 Gb
2 x 10 Gb