Cisco UCS 5108 Spec Sheet page 36

SUPPLEMENTAL MATERIAL
Supported 4-CPU card adapter combinations are shown in
Table 19 Supported Mezzanine Adapter Combinations (4-CPU Configuration)
Adapter in VIC Adapter in
1240 Connector Mezzanine Slot 1
VIC 1240 Not populated
VIC 1240 Not populated
Not populated Not populated
VIC 1240 Not populated
VIC 1240 Port Expander
Card for VIC 1240
Not populated Not populated
Not populated Cisco-certified
mezzanine
adapter
VIC 1240 Port Expander
Card for VIC 1240
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual
interfaces into a group to provide increased bandwidth and redundancy. Port channeling also load balances
traffic across these physical interfaces. The port channel stays operational as long as at least one physical
interface within the port channel is operational. Cisco-certified adapters suppled by third-party vendors do
not support port channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for
use in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
3. The 2104XP fabric extender is not compatible with any I/O card installed in mezzanine connector 1.
36
Table
Adapter in
Mezzanine Slot 2
2 x 2208 XP
Not populated
VIC 1280
VIC 1280
Cisco-certified
mezzanine
2
adapter
Not populated
Cisco-certified
mezzanine adapter
Cisco-certified
mezzanine adapter
VIC 1280
19.
Total Available Bandwidth
2 x 2204 XP
40 Gb 20 Gb
120 Gb 60 Gb
80 Gb 40 Gb
60 Gb 40 Gb
80 Gb 40 Gb
20 Gb 20 Gb
40 Gb 40 Gb
160 Gb 80 Gb
Cisco UCS 5108 Blade Server Chassis
1
2 x 2104 XP
20 Gb
40 Gb
20 Gb
40 Gb
Not supported 3
20 Gb
Not supported 3
Not supported 3