Cisco UCS 5108 Spec Sheet page 23

For the B200/B230 M1/M2 blade servers, supported card adapter combinations are shown in
Table 15 Adapter Card Options
Fabric
Extender Adapter in Mezzanine Connector
Compatibility
2208XP
2208XP M81KR
2208XP
VIC 1280
2208XP
Cisco-certified mezzanine adapter
2204XP
2204XP M81KR
2204XP
VIC 1280
2204XP
Cisco-certified mezzanine adapter
2104XP
2104 XP M81KR
2104 XP
VIC 1280
2104XP
Cisco-certified mezzanine adapter
Notes . . .
1. Cisco-designed adapters are capable of port channeling. A port channel bundles up to four individual interfaces
into a group to provide increased bandwidth and redundancy. Port channeling also load balances traffic across
these physical interfaces. The port channel stays operational as long as at least one physical interface within
the port channel is operational. Cisco-certified adapters suppled by third-party vendors do not support port
channeling. Port channeling is indicated with an oval drawn around several individual ports.
2. Available only on M2 and M3 servers (not available on M1 servers)
3. Cisco-certified mezzanine adapters are manufactured by third-party vendors and are certified by Cisco for use
in the servers. For more information about supported Cisco-certified mezzanine adapters, see
http://www.cisco.com/en/US/docs/unified_computing/ucs/hw/chassis/install/blade.html#wp1010426
The general connectivity diagrams between the mezzanine adapter cards and the different fabric extenders
are shown in Figure 9 on page 24
Cisco UCS 5108 Blade Server Chassis
2
2
2
through Figure 11 on page
3
3
3
25.
SUPPLEMENTAL MATERIAL
Table 17.
1
Ports
2 x 10 Gb
8 x 10 Gb
2 x 10 Gb
2 x 10 Gb
4 x 10 Gb
2 x 10 Gb
2 x 10 Gb
2 x 10 Gb
2 x 10 Gb
23