Presets - RME Audio MULTIFACE User Manual

15.7 Presets

During the driver installation 8 factory presets will be copied to the directory \Windows. The
files are named preset1.mix to preset8.mix, and will be used when clicking on the 8 Preset
buttons in the Quick Access Panel.
But TotalMix will read those files only at first usage. As soon as one of the Presets is saved,
TotalMix writes a new file and adds the number of the currently used system (Card 1, 2 or 3).
The files preset1.mix thus changes to preset11.mix, if Card 1 was active. This method offers
two major advantages:
Presets modified by the user will not be overwritten when reinstalling or updating the driver
The factory presets remain unchanged, and can be reloaded anytime using the menu,
Files/Open
The 8 factory presets offer not only a useful functionality for TotalMix, but also a pretty good
base to modify them to your personal needs.
Preset1.mix
Description: All channels routed 1:1, playback monitoring via headphone out
Details: All inputs maximum attenuation (m.a.). All playback channels 0 dB, routet to the same
output. All output channels 0 dB, phones -6 dB. Submix of all inputs and outputs to the analog
output (Phones), with input faders set to m.a., playback to 0 dB. All channels prepared for all
routings to left/right panning. Level display set to RMS -3 dB.
Note: This preset is Default, offering the standard functionality of a I/O-card.
Preset2.mix
Description: All channels routed 1:1, input and playback monitoring via Phones. As Preset 1,
plus submix of all inputs (0 dB) on Phones.
Preset3.mix
Description: All channels 1:1, input and playback monitoring via Phones and outputs. As Preset
2, but all inputs set to 0 dB (1:1 pass through).
Preset4.mix
Description: All channels 1:1, playback monitoring via Phones and outputs. As Preset 3, but all
inputs muted.
Preset5.mix
Description: All faders m.a. As Preset 1, but all outputs m.a.
Preset6.mix
Description: Submix on SPDIF at -6 dB. As Preset 1, plus submix of all playbacks on SPDIF.
View Submix SPDIF active.
Preset7.mix
Description: Submix on SPDIF at -6 dB. As Preset 6, but submix of all inputs and outputs on
SPDIF. View Submix SPDIF active.
Preset8.mix
Description: Panic. As Preset 4, but also playback muted (no output signal)
User's Guide HDSP System Multiface © RME
29