Presets - RME Audio Hammerfall HDSP 9632 User Manual

15.7 Presets

TotalMix includes 8 factory presets, stored within the program. But the presets can be changed
at any time, because TotalMix stores and reads the changed presets from the files
preset11.mix to preset81.mix. These files are found in the hidden directory Documents and
Settings, <Username>, Local Settings, Application Data, RME TotalMix. The first number
indicates the current preset, the second number the current card/system.
This method offers two major advantages:
Presets modified by the user will not be overwritten when reinstalling or updating the driver
The factory presets remain unchanged, and can be reloaded anytime.
The original factory preset can be reloaded by holding down the Ctrl-key and clicking on any
preset button. Alternatively the files described above can be renamed, moved to a different
directory, or being deleted.
The 8 factory presets offer not only a useful functionality for TotalMix, but also a pretty good
base to modify them to your personal needs.
Preset1.mix
All channels routed 1:1.
Details: All inputs maximum attenuation (m.a.). All playback channels 0 dB, routet to the same
output. All outputs 0 dB. All channels prepared for all routings to left/right panning. Level
display RMS +3 dB not activated.
Note: This preset is Default, offering the standard functionality of a I/O-card.
Preset2.mix
Details: Submix to Analog –6 dB. As Preset 1, plus submix of all inputs and playbacks to AN
1+2. View Submix AN 1+2 active.
Preset3.mix
Details: All channels 1:1. As Preset 1, but all input faders set to 0 dB (1:1 pass through).
Preset4.mix
Details: All channels 1:1. As Preset 3, but all inputs muted.
Note: This preset is default for ZLM and MME Mix/Replace monitoring. The factory preset 4 will
also be loaded by a click on Load Def.
Preset5.mix
Details: All faders m.a. As Preset 1, but all outputs m.a.
Preset6.mix
Details: Submix to SPDIF at -6 dB. As Preset 1, plus submix of all inputs and playbacks to
SPDIF. View Submix SPDIF active.
Preset7.mix
Details: All channels routed 1:1. As Preset 1, but Submix View AN 1+2 active.
Preset8.mix
Description: Panic. As Preset 4, but also playback muted (no output signal)
User's Guide Hammerfall DSP 9632 © RME
30