Advanced Use - Boss BR-600 Recording Manualbook

S
tep
3
You can send data recorded with the BR-600 to a computer as WAV or AIFF fi les. This means
Step
1
make the computer a part of your music creation
them to MP3 fi les for e-mailing, uploading to music blogs, or just about any other use you can think of.
Sending Recorded Data to a Computer
Step
2
1. When you're done adjusting the sound
quality and balance for each track, press
so the BOUNCE indicator is lit.
2. Pressing
mixed sound and records it (as a mixdown)
Step
3 on the track shown at the top right of the
display (such as 78V1).
Next, connect the computer and the BR-600 by USB and send the WAV or AIFF fi les.
3. Make sure
If
4. Press CURSOR
5. Turn the TIME/VALUE knob to choose "EXPORT," then press
6. Press CURSOR
7. Turn the TIME/VALUE knob to choose
the mixdown track you used in step 1 (in
this example, that's 78V1), then press
6

Advanced Use

and takes the
is not lit, then press
is lighted, press to turn it off.
to move the cursor to "USB," then press
to move the cursor to either "WAV" or "AIFF," then press
Connect to your computer
using a USB cable.
process, so you can burn your songs to a CD or convert
To make recorded data ready for sending to
1
a computer, you must compile the ensemble
4, 6 ,
performance — the chords, arpeggios, vocals,
5, 7
and everything else — into just two tracks. (This
is called a "mixdown" or "bouncing.")
3
2
.
.
you can
.
.
.
Create audio CDs and back
up your data.