Summary of Contents for MULTIQUIP Mikasa Series MVH306ds2
Page 1
OperatiOn and parts Manual series MOdel MVH306ds2/ MVH306dsCpas reVersiBle plate COMpaCtOr (YanMar l70V6GJ1r1aas5 diesel enGine) Revision #7 (02/04/14) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
, 2006 Order via internet (dealers Only) Best deal! If you have an MQ Account, to obtain a Username Order parts on-line using Multiquip’s SmartEquip website! and Password, E-mail us at: parts@multiquip. com. I View Parts Diagrams I Order Parts To obtain an MQ Account, contact your District Sales Manager for more information.
SAfETY INfORMATION Do not operate or service the equipment before reading Potential hazards associated with the operation of this the entire manual. Safety precautions should be followed equipment will be referenced with hazard symbols which at all times when operating this equipment. may appear throughout this manual in conjunction with Failure to read and understand the safety safety messages.
Page 7
neveR use accessories or attachments that are not neveR operate this equipment when not recommended by Multiquip for this equipment. Damage feeling well due to fatigue, illness or when to the equipment and/or injury to user may result.
Page 8
SAfETY INfORMATION COMPACTOR SAFETY WaRning dangeR dO nOT place hands or fingers inside engine compartment when engine is running. neveR operate the equipment in an explosive atmosphere or near combustible materials. An neveR operate the engine with heat shields or explosion or fi re could result causing severe guards removed.
Page 9
SAfETY INfORMATION FueL saFeTY BaTTeRY saFeTY (eLeCTRiC sTaRT OnLY) dangeR dangeR dO nOT add fuel to equipment if it is placed inside truck dO nOT drop the battery. There is a possibility that the bed with plastic liner. Possibility exists of explosion or battery will explode.
Page 10
SAfETY INfORMATION TRanspORTing saFeTY When the life cycle of this equipment is over, remove battery and bring to appropriate facility for lead CauTiOn reclamation. Use safety precautions when handling batteries that contain sulfuric acid. NEVER allow any person or animal to stand underneath ...
SpECIfICATIONS Table 1. mvh306ds2/dsCpas Reversible plate Compactor specifications Centrifugal Force 10,116 lbs. (4,588 kg) vibration Frequency 3,600 vpm (60 Hz) Traveling speed 0 to 75 ft/min (0 to 23 m/min) plate size (L x W) 18 x 34 in (45.72 x 86.36 cm) external plate size (L x W) 24 x 34 in (60.96 x 86.36 cm) max.
GENERAl NfORMATION plate Compactor Frequency/speed The Mikasa MVH306DS2/DSCPAS is a walk behind, The compactor's vibrating plate maximum frequency is reversible plate compactor designed for the compaction of 4400 vpm (vibrations per minute). The forward and reverse sand, clay and asphalt. This plate compactor is a powerful travel speed of the compactor is approximately 75 ft./minute compacting tool capable of applying a tremendous force in (23 meters/minute).
COMpONENTS M V H - 3 0 6 Figure 2. MVH306DS2/DSCPAS Reversible Plate Compactor Components Figure 2 illustrates the location of the major components for 8. Belt Cover – Remove this cover to gain access to the V-belts. neveR run the compactor without the V-belt the MVH306DS2/DS2CPAS Reversible Plate Compactor.
bASIC ENGINE Figure 3. Yanmar L70V6 Engine Components engine COmpOnenTs Figure 3 illustrates the location of the major components 6. Recoil Starter – Manual-starting method. Pull the for the Yanmar L70V6 diesel engine. The function of each starter grip until resistance is felt, then pull briskly and component is described below smoothly.
INSpECTION Before starting UPPER LEVEL 1. Read safety instructions at the beginning of manual. 2. Familiarize yourself with the operating and control elements of the machine and the working environment. This includes obstacles in the working area, bearing capacity of the ground and the necessary safety provisions.
Page 17
INSpECTION 3. Remove the air cleaner element (Figure 9) and inspect CauTiOn it for signs of wear or dirt. If air cleaner element is dirty, dO nOT overfill hydraulic oil tank. This could cause clean or replace element. oil leaks and sluggish operation. Clean cap and surrounding area before opening to prevent dirt from ELEMENT entering oil tank.
OpERATION 3. When the handle is raised to the desired height, tighten CauTiOn the butterfly screw. dO nOT attempt to operate the compactor until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the compactor.
Page 19
OpERATION Recoil Start NOTICE 1. Place the fuel cock in the Open position (Figure 13). When starting a unit with an electric strart capability, a decompressor is not normally required. However, when 2. Move the throttle lever to the START position ambient temperature or battery charger level is low, use (Figure 14).
Page 20
OpERATION TRaveLing 4. To make the compactor move in the reverse direction pull the travel lever ( Figure 19) backwards. CauTiOn 5. Firmly gasp the compactor's hand grip, the compactor Make sure to follow all safety rules referenced in will begin moving in the desired position when the the safety section of this manual before operating direction lever has been placed in the desired position.
Page 21
OpERATION emergency shutdown 4. If using an electric start unit, return the key switch to the STOP position (Figure 21) as soon as the engine stops. 1. For a recoil start type engine, move the throttle lever quickly to the STOP position. 2.
Page 22
OpERATION COmpaCTiOn sensOR (mvh306 dsCpas Only) When the plate compactor is in idle mode the green LED will begin flashing and the red LED will turn on. As the Compaction Analyzing System (COMPAS) is a system that engine RPM's are increased and compaction begins, the uses an acceleration sensor to show real-time soil stiffness green LED will stop flashing and turn on (solid).
Page 23
OpERATION system diagnostics to detect Operational VIBRATION ABNORMALITY DUE TO IMPROPER ENGINE RPM abnormalities Detection of ground trouble and soft ground GREEN LED FLASHING 1. For a case of unstable ground or soft ground (soil containing high clay content) for which the use of this machine is not suitable, only the green and red LEDs will be on (Figure 27), with no yellow LED's on.
MAINTENANCE Table 6. mvh-306ds2/dsCpas engine Check CauTiOn item hours of Operation Inspection and other services should always be carried out on hard and level ground with the engine shutdown. Oil or Fuel Leak Every 8 hours (every day) inspection and maintenance service Tables. Tightness of Fastening Every 8 hours (every day) Threads...
Page 25
MAINTENANCE engine Oil Replacement: 1. Replace engine oil, in first 25 hours of operation and CLUTCH every 50 to 100 hours afterwards. 2. Oil may be drained more easily when it is warm afteroperation (For more details, see separate engine V-BELT Owner's Manual).
Page 26
MAINTENANCE vibrator Oil Level Check 4. After hydraulic oil has been completely drained from machine, fill with 10W-30 motor oil to the appropriate NOTICE safe operating level (Figure 33). ALWAYS clean the area around the vibrator oil level 5. Reinstall drain plug into vibrating plate assembly. Apply check plug before removing oil check plug.
Page 27
MAINTENANCE 2. Using a funnel, add Shell Tellus Oil #32 or equivalent CauTiOn to the hydraulic oil tank through the oil filler port ALWAYS wear safety glasses or face mask, protective (Figure 36). Oil tank capacity is 18.7 fl. oz (550 cc). clothes, and rubber gloves when working with battery.
Page 28
MAINTENANCE BaTTeRY ChaRging BaTTeRY CaBLe COnneCTiOn (Option) dO nOT charge battery with the battery cables 1. Take off the battery cover by removing the M6 nuts that connected to the compactor. The diodes will be damage secure the battery holder to the cover. by the high voltage.
Page 29
MAINTENANCE Figure 40. Fuel Filter Figure 42. Recoil Starter Grip LOng TeRm sTORage 5. For electric start type compactors, turn the engine for 2 or 3 seconds with the decompression lever set in the When storing your compactor for long periods do the non-decompression position, and the starter key at the following: START position.
A blank entry generally indicates that the item is not sold “not sold separately” — Indicates that an item cannot separately or is not sold by Multiquip. Other entries will be purchased as a separate item and is either part of an be clarifi ed in the “Remarks”...
NAMEplATES AND DECAlS paRT nO. paRT name QTY. REMARKS 920201950 DECAL: OIL SAE 10W-30 920105070 DECAL: MIKASA LOGO ........1....ELECT. START MODEL ONLY 920110370 DECAL: MODEL LOGO MVH-306 920209620 DECAL: CAUTION 920211090 DECAL: SHELL TELLUS OIL 32 920204580 DECAL: FULL THROTTLE 920203330 DECAL: EAR PROTECTION 920211060...
HAND puMp ASSY. page 46 — mvh306ds2/dsCpas pLaTe COmpaCTOR • OpeRaTiOn and paRTs manuaL — Rev. #7 (02/04/14)
Page 47
HAND puMp ASSY. paRT nO. paRT name QTY. REMARKS 464910040 ACCUMLATOR 464910080 O-RING DUST, SEAL, SET .......1....INCLUDES ITEMS W/# 464010040 CONTROL SHAFT 464010050 BUSH 464010060 464010070 STOPPER 099205005 SOCKET HEAD SCREW 5X5 T 464010080 PLUG 464010090 PIN,STOPPER 464010100 PLUG 458010080 BREATHER 014206020...
YANMAR l70V6 — CYlINDER HEAD ASSY. page 56 — mvh306ds2/dsCpas pLaTe COmpaCTOR • OpeRaTiOn and paRTs manuaL — Rev. #7 (02/04/14)
Page 57
YANMAR l70V6 — CYlINDER HEAD ASSY. paRT nO. paRT name QTY. REMARKS 11421001200 CYLINDER HEAD A BOLT 11421001210 CYLINDER HEAD B BOLT 11421011020 CYLINDER HEAD ASSY. 11421011100 INTAKE VALVE 11421011110 EXHAUST VALVE 11421011120 VALVE SPRING 11421011180 SPRING RETAINER 11421011930 COTTER ASSY. 11421011250 SUPPORT ASSY.
YANMAR l70V6 — AIR ClEANER ASSY. page 58 — mvh306ds2/dsCpas pLaTe COmpaCTOR • OpeRaTiOn and paRTs manuaL — Rev. #7 (02/04/14)
Page 59
YANMAR l70V6 — AIR ClEANER ASSY. paRT nO. paRT name QTY. REMARKS 11421012511 AIR CLEANER ASSY.........1....INCLUDES ITEMS W/# 11421012020 AIR CLEANER BODY 11421012520 AIR CLEANER COVER 11421012560 WING NUT 11421012580 STUD BOLT 11421012590 ELEMENT ASSY. 11421012600 KNOCKING KNOB 11429912300 U-NUT 11421012210 AIR CLEANER GASKET...
YANMAR l70V6 — COOlING AND STARTING DEVICE ASSY. page 68 — mvh306ds2/dsCpas pLaTe COmpaCTOR • OpeRaTiOn and paRTs manuaL — Rev. #7 (02/04/14)
Page 69
YANMAR l70V6 — COOlING AND STARTING DEVICE ASSY. paRT nO. paRT name QTY. REMARKS 11429945220 TANK GROMMET 11421045260 SIDE COVER B (13) 11421045270 SIDE COVER A (13) 11421045300 TOP COVER, BLACK (13) 11421045310 DAMPER 11439945320 SEAL RUBBER 11435045340 CYLINDER COLLAR COVER 11421045350 TOP COVER SPACER 26106060082...
YANMAR l70V6 — fuEl TANk AND fuEl lINE ASSY. SEE FUEL INJECTION ASSY. SEE FUEL INJECTION ASSY. page 72 — mvh306ds2/dsCpas pLaTe COmpaCTOR • OpeRaTiOn and paRTs manuaL — Rev. #7 (02/04/14)
Page 73
YANMAR l70V6 — fuEl TANk AND fuEl lINE ASSY. paRT nO. paRT name QTY. REMARKS 71424955020 FUEL TANK, BLACK ..........1....INCLUDES ITEMS W/@ 11429955080 DRAIN PLUG 23414080000 PACKING 8 11428855041 FUEL TANK CAP ASSY........1....INCLUDES ITEMS W/+ 11428855081 CAP VALVE 11425055100 FILTER, FUEL 11435055150 PIPE GUAGE...