Pre-Installation Requirements; Hardware And Software Requirements; Ordering Caller Id - Panasonic DBS Caller ID Installation And Operation Manual

Pre-Installation Requirements

Hardware and Software Requirements

The following hardware and software are required for Caller ID.
Equipment Model Number
Loop-start trunk VB-43511A (8 ports)
card
Caller ID card VB-43551
MFR Card VB-43431 (for Caller ID Auto DISA)
CPC Card VB-43411 (CPC-B; must be version 6.1 or higher)
or
VB-43412 (CPC-A II; must be version 6.1 or higher)

Ordering Caller ID

The following guidelines describe Caller ID options that can be
ordered from your local operating company or interexchange carrier.
Table 1-1. Guidelines for ordering T1 services
Item to be
Ordered Options
Line Type Single-party loop start lines. (As an alternative,
you may want to add Caller ID to existing single-
party loop start lines.)
Issued April 2000

Pre-Installation Requirements

1-5