Intermec PW50 User Manual page 41

PW50 Workboard Printer User's Guide
Chapter 3 — Troubleshooting and Maintaining the PW50
Cleaning the PW50 Printer
Printer Part Cleaning Method
Platen roller Rotate the platen roller and clean it
thoroughly using a cleaning swab
(P/N AE26034).
Paper sensor Remove buildup and clean
thoroughly using a cleaning swab.
Tear bar Clean thoroughly using a cleaning
swab.
Printhead Use the cleaning pen (P/N 757150),
or a cleaning swab to remove
buildup.
Exterior Clean with a soft, water-dampened
cloth. Abrasive chemicals or
materials can damage the exterior.
Interior Brush or air blow. Make sure the
paper sensor is free of dust.
Cleaning Interval
After every five rolls of
media, or more often if
necessary.
After every five rolls of
media, or more often if
necessary.
As needed.
After every five rolls of
media, or more often if
necessary.
As needed.
After every five rolls of
media, or more often if
necessary.
31