Pc Health Status - Gigabyte GA-B85M-D3H User Manual

` PC Health Status

& Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. (Default)
Disabled
Clears the record of previous chassis intrusion status and the Case Open field will show
Enabled
"No" at next boot.
& Case Open
Displays the detection status of the chassis intrusion detection device attached to the motherboard CI
header. If the system chassis cover is removed, this field will show "Yes", otherwise it will show "No". To
clear the chassis intrusion status record, set Reset Case Open Status to Enabled, save the settings to
the CMOS, and then restart your system.
& CPU Vcore/CPU VRIN/DRAM Voltage/+3.3V/+5V/+12V/CPU VAXG
Displays the current system voltages.
& CPU/System Temperature
Displays current CPU/system temperature.
& CPU/System FAN Speed
Displays current CPU/system fan speeds.
& CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold, BIOS
will emit warning sound. Options are: Disabled (default), 60
& CPU Fan Speed Control
Allows you to determine whether to enable the CPU fan speed control function for the system fan connected
to the CPU_FAN connector and adjust the fan speed.
Allows the fan to run at different speeds according to the CPU temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the fan speed. This item is configurable only when CPU Fan Speed Control is set
to Manual. Options are: 0.75 PWM value /
& 1st System Fan Speed Control (SYS_FAN1 Connector)
Allows you to determine whether to enable the CPU fan speed control function for the system fan connected
to the SYS_FAN1 connector and adjust the fan speed.
Allows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
Allows you to control the fan speed under the Slope PWM item.
Manual
Allows the fan to run at full speeds.
Disabled
& Slope PWM
Allows you to control the fan speed. This item is configurable only when 1st System Fan Speed Control
is set to Manual. Options are: 0.75 PWM value /
& 2nd/3rd System Fan Speed Control (SYS_FAN2/ SYS_FAN3 Connectors)
Allows you to determine whether to enable the CPU fan speed control function for the system fan connected
to the SYS_FAN2/SYS_FAN3 connector and adjust the fan speed.
Allows the fan to run at different speeds according to the system temperature. You can adjust
Normal
the fan speed with EasyTune based on your system requirements. (Default)
Allows the fan to run at slow speeds.
Silent
C/140 F, 70 C/158
o o o
C ~ 2.50 PWM value / C.
o o
C ~ 2.50 PWM value / C.
o o
- 23 -
F, 80 C/176 F, 90 C/194 F.
o o o o o