Hot Plug; Parallel Port - Gigabyte GA-B85M-D3H User Manual

` SATA Configuration
& SATA Controller(s)
Enables or disables the integrated SATA controllers. (Default: Enabled)
& SATA Mode Selection
Enables or disables RAID for the SATA controllers integrated in the Intel
SATA controllers to AHCI mode.
IDE Configures the SATA controller to IDE mode.
AHCI C onfigures the SATA controller to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug. (Default)
` Serial ATA Port 0/1/2/3/4/5
& Port 0/1/2/3/4/5
Enables or disables each SATA port. (Default: Enabled)
& Hot plug
Enables or disable the hot plug capability for each SATA port. (Default: Disabled)
` Super IO Configuration
This section provides information on the super I/O chip and allows you to configure the serial port and

parallel port.

& Serial Port A
Enables or disables the onboard serial port. (Default: Enabled)
& Parallel Port
Enables or disables the onboard parallel port. (Default: Enabled)
& Device Mode
This item is configurable only when Parallel Port is set to Enabled. Selects an operating mode for the onboard
parallel (LPT) port. (Default), EPP Mode (Enhanced Parallel Port), ECP Mode (Extended Capabilities Port),
EPP Mode & ECP Mode.
` Intel(R) Smart Connect Technology
& ISCT Support
Enables or disables Intel
®
` Realtek PCIe GBE Family Controller (MAC:90:2B:34:DA:E3:BC)
This sub-menu provides information on LAN configuration.
Smart Connect Technology. (Default: Disabled)
- 30 -
B85 Chipset or configures the
®