Fold Position Adjustment For Saddle Fold; Fold/Staple Position Adjustment For Saddle Stitch; Staple Position Fine Adjustment For Saddle Stitch; Paper Alignment Width Adjustment For Saddle Stitch/Saddle Fold - Sharp MX-6500N Adjustment Manual

Input range: [50] to [150] (1 = 0.1 mm)
Default: [100]
3.1.3

Fold Position Adjustment for Saddle Fold

This performs fold position adjustment for saddle fold
(without staple).
1) Select [Fold Position Adjustment for Saddle Fold] in the
Saddle Finisher screen.
2) Adjust the fold positions in the direction of paper
transport for saddle folding.
The 10-key pad appears when each of the textboxes is
tapped. Enter the desired values.
Input range: [42] to [58] (1 = 0.25 mm)
Default: [50] for each
3.1.4 Fold/Staple Position Adjustment for Saddle
Stitch
This performs adjustment of fold and staple positions for
saddle stitch (fold and staple) (both fold and staple
positions are adjusted together).
1) Select [Fold/Staple Position Adjustment for Saddle
Stitch] in the Saddle Finisher screen.
2) Adjust the fold/staple positions in the direction of paper
transport for saddle stitching.
The 10-key pad appears when each of the textboxes is
tapped. Enter the desired values.
Input range: [42] to [58] (1 = 0.25 mm)
Default: [50] for each
3.1.5 Staple Position Fine Adjustment for Saddle
Stitch
This performs fine adjustment of staple position for saddle
stitch (fold and staple) (used for fine adjusting staple
position only).
1) Select [Staple Position Fine Adjustment for Saddle
Stitch] in the Saddle Finisher screen.
2) Fine-tune the staple position in relation to the fold
position for saddle folding.
The 10-key pad appears when the textbox is tapped.
Enter the desired value.
Input range: [20] to [80] (1 = 0.1 mm)
Default: [50]
3.1.6 Paper Alignment Width Adjustment for
Saddle Stitch/Saddle Fold
This performs jogger width adjustment for saddle stitch
and saddle fold.
Set this adjustment when the stapled stuck of paper is not
aligned.
1) Select [Paper Alignment Width Adjustment for Saddle
Stitch/Saddle Fold] in the Saddle Finisher screen.
2) Adjust the distance between the alignment plates in the
direction of paper width for saddle stitching/saddle
folding.
The 10-key pad appears when the textbox is tapped.
Enter the desired value.
24