Table of Contents
Advertisement
Installing a 2.5-inch Hard Drive
1. Place the HDD into the HDD mounting bracket with the printed circuit board side facing
down. Carefully align the mounting holes in the hard drive and the HDD carrier.
2. Secure the hard drive into the place using the four screws.
3. Attach one end of the SATA 1 to 1 Power Cable to the hard drive.
4. Secure the HDD mounting bracket to the chassis using the four screws.
5. Attach the SATA data cable and power cable to the motherboard.
5
SATA_PWR1
10
4
2
2
5
SATAII_1
4
2
1
2
3
4
4
Advertisement
Table of Contents
