Hardware Health Event Monitoring Screen - ASROCK FM2A85X Extreme4-M User Manual

3.6 Hardware Health Event Monitoring Screen

In this section, it allows you to monitor the status of the hardware on your
system, including the parameters of the CPU temperature, motherboard
temperature, CPU fan speed, chassis fan speed, and the critical voltage.
CPU Fan 1 & 2 Setting
This allows you to set the CPU fan 1 & 2 speed. Configuration op-
tions: [Full On] and [Automatic Mode]. The default is value [Full
On].
Chassis Fan 1 Setting
This allows you to set the chassis fan 1 speed. Configuration op-
tions: [Full On], [Manual Mode] and [Automatic Mode]. The default
is value [Full On].
Over Temperature Protection
Use this item to enable or disable Over Temperature Protection.
The default value is [Enabled].
Case Open Feature
This allows you to enable or disable case open detection feature.
The default is value [Enabled].
Clear Status
This option appears only when the case open has been detected.
Use this option to keep or clear the record of previous chassis in-
trusion status.
71