Table of Contents
Advertisement
2.14 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your
optical drive first. Then, the drivers compatible to your system can be auto-
detected and listed on the support CD driver page. Please follow the order
from top to bottom to install those required drivers. Therefore, the drivers
you install can work properly.
®
TM
2.15 Installing Windows
8 / 8 64-bit / 7 / 7 64-bit / Vista
/
TM
Vista
64-bit With RAID
®
TM
TM
If you want to install Windows
8 / 8 64-bit / 7 / 7 64-bit / Vista
/ Vista
64-bit OS on your SATA3 HDDs with RAID, please follow the steps below.
STEP 1: Set up UEFI.
A. Enter UEFI SETUP UTILITY
Advanced screen
Storage
Configuration.
B. Set the option "SATA Mode" to [RAID].
STEP 2: Use "RAID Installation Guide" to set the RAID configuration.
Before you start to configure the RAID function, you need to check the
installation guide in the Support CD for proper configuration. Please refer
to the document in the Support CD, "Guide to SATA Hard Disks Installation
and RAID Configuration", which is located in the folder at the following
path: .. \ RAID Installation Guide
®
TM
TM
STEP 3: Install Windows
8 / 8 64-bit / 7 / 7 64-bit / Vista
/ Vista
64-bit OS on your system.
48
Advertisement
Table of Contents
