Front Panel Header - Acer AcerPower F6 Service Manual

ATX_12V: ATX 12V Power Connector
Pin Signal Name
1 Ground
2 Ground
3 +12V
4 +12V

Front Panel Header

The front panel header (PANEL1) provides a standard set of switch and LED headers commonly
found on ATX or Micro ATX cases. Refer to the table below for information.
Pin Signal Name
1 HD_LED (+)
3 HD_LED (-)
5 Reset_SW_N
7 Reset_SW_P
9 RSVD
11 RSVD
13 RSVD
Hard Drive Activity LED
Connecting pin one and pin three provides visual indication that data is being read from or
written to the hard drive. For the LED to function properly, and IDE drive should be connected to
the onboard IDE interface. The LED will also show activity for devices connected to the SCSI (hard
drive activity LED) connector.
Power/Sleep/Message Waiting LED
Connecting pin two and pin four to a single or dual-color, front panel mounted LED provides
power on/off, sleep, and message waiting indication.
54
Function Pin
Hard disk LED (+)
Hard disk LED (-)
Reset ground
Reset signal
Reserved 10
Reserved 12
Reserved 14
Signal Name
2 PWR_SLP
4 PWR_SLP
6 PWR_SW_P
8 PWR_SW_N
KEY
LAN_LED (+)
LAN_LED (-)
Function
Power LED (+)
Power LED (-)
Power button
signal
Power button
ground
Key
LAN LED (+)
LAN LED (-)
Chapter 5