Integrated Peripherals - Acer AcerPower F6 Service Manual

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system. Press <Esc> to
return to the main menu setting page.
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
OnBoard PCI S-ATA Controller
USB 2.0 Support
USB Controller
Onboard LAN Controller
Onboard LAN Boot ROM
Onboard IEEE1394 Controller
Serial Port1 Address
Serial Port2 Address
Serial Port2 Mode
Parallel Port Address
Parallel Port Mode
ECP Mode DMA Channel
Parallel Port IRQ
Onboard PCI SATA Controller (RAID)
Use this item to enable or disable the onboard PCI SATA controller.
USB 2.0 Support (Enabled)
Use this item to enable or disable the USB 2.0 support.
USB Controller (Enabled)
Use this item to enable or disable the USB controller.
Onboard LAN function (Enabled)
User this item to enable or disable the onboard LAN function.
Onboard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network add-on card
with a remote boot ROM installed.
Onboard IEEE 1394 Controller (Enabled)
Use this item to enable or disable the onboard VIA 1394 device.
32
Integrated Peripherals
: Move Enter : Select
F1:General Help
IDE
Enabled
Enabled
Enabled
Disabled
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
378
ECP
DMA3
IRQ7
F10: Save & Exit
+/-/: Value
F9: Optimized Defaults
Help Item
Option
IDE
ESC: Exit
Chapter 2