Part Names And Functions - Fujitsu Plasmavision P42HHS10W User Manual

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT
Control Panel (Right side of display)
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
1 Power indicator lamp
(Right section)
This lamp shows the state of the power supply.
Lit (red):
Lit (green):
Lit (orange):
Flashing (red): Malfunction (Flashes differently depending
2 Remote control signal receiver
Receives signals from the remote control.
3 Input mode selector button
4 Input mode selector button
Switches between picture input modes.
5 VOL + button
6 VOL – button
Adjusts the sound volume.
7 Wide screen selector button [WIDE]
Switches the screen over to a desired wide screen.
8 ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Stand-by
Power ON
Power saving (DPMS: Power saving
function) mode ON (See P. E-42.)
on the type of malfunction. See P. E-50 for
more information.)
[MODE]
[MODE]
E-7