Dvd Player - Fujitsu Plasmavision P42HHS10W User Manual

CONNECTING THE DISPLAY TO EXTERNAL EQUIPMENT (Continued)

DVD PLAYER

• Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
• If the component to be connected is equipped with component video output terminal, it is recommended to connect to the component video
terminal.
To S-video
output
AMPLIFIER
• Connect the audio signal cable to either the digital output or the analog audio output.
* The signal input as digital input is not output as analog audio.
* The digital audio input terminal on the display complies with a sampling frequency of 48 kHz.
In the case of outputs with another frequency, connect to an audio system (amplifier)*.
To analog audio input
E-20
To video output
To audio outputs
To component
video output
VIDEO1
AUDIO
INPUT
VIDEO1
COMPONENT VIDEO
Y P B /C B P R /C
PICTURE
VIDEO5
INPUT
COMPONENT VIDEO
Y P
To component video input
To digital audio input
VIDEO1 VIDEO2
AUDIO
INPUT
VIDEO1
COMPONENT VIDEO
Y P B /C B P R /C R
PICTURE
VIDEO5
INPUT
COMPONENT VIDEO
Y P B
To audio
inputs To video input
VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO2
S COMPONENT VIDEO S COMPONENT VIDEO
R Y P B /C B P R /C R Y P B /C B P R /C R
VIDEO1
COMPONENT VIDEO mD-sub
/C P /C Y P /C P /C
B B R R B B R R
RGB1
DVI
DISPLAY OUTPUT
Rear side of selector
To S-video input
To analog audio output
VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2
DIGITAL1 DIGITAL2
VIDEO2
COMPONENT VIDEO COMPONENT VIDEO
S S
Y P /C P /C
B B R R Y P B /C B P R /C R
VIDEO1
COMPONENT VIDEO
mD-sub
/C B P R /C R Y P /C P /C
B B R R
RGB1
DVI
DISPLAY OUTPUT
Rear side of selector
AUDIO
OUTPUT
DIGITAL
VIDEO4
S
RGB2
PICTURE AUDIO
To digital audio output
AUDIO
OUTPUT
DIGITAL
VIDEO4
S
RGB2
PICTURE AUDIO