Part Names And Functions; Front Display - Fujitsu Plasmavision P42HTS51E User Manual

PART NAMES AND FUNCTIONS

DISPLAY SECTION – FRONT
Warning
If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Lit (green):
Flashing (red or green):
Remote control signal receiver
Receives signals from the remote control.
Input mode selector button
Input mode selector button
Switches the input modes (Video mode, RGB mode and TV mode).
Volume + button
Volume - button
Adjusts the audio volume.
Wide screen selector button
Switches the screen over to a desired wide screen.
ON/OFF button
Turns the power "ON" and "OFF (standby state)".
Ambient Sensor
Detects the brightness of ambient light.
It is important not to obstruct it for full functionality of the feature.
Stand-by state
Power ON state
Malfunction (Flashes differently
depending on the type of
malfunction.)
E-5