Recording Video - Honeywell Dolphin 7800 User Manual

6. Tap OK on the Tile Bar to return to the active viewfinder screen.
Menu
Tap Menu on the Tile Bar at the bottom of the touch screen to adjust the camera settings, switch to video
mode, and access additional camera options.
Item
Video
Mode
Resolution
Zoom
Flash
Focus
Brightness
Full Screen
Options
Options
Tap Menu > Options. The Options menu contains four screens:
General Tab

Recording Video

1. Tap > Pictures & Videos > Camera > Menu > Video
2. Point the terminal's camera lens at the object you want to capture.
3. Press the ENT key to start recording.
4. Tap Stop on the touch screen or press ENT to stop recording.
Descriptions
Activate Video Mode
Set Mode (i.e., Normal, Burst, or Timer)
Set Picture Resolution (i.e., QVGA, VGA, SVGA, XGA, UXGA, or QXGA)
Set Zoom (i.e., x1, x2, or x3)
Set Camera Flash On or Camera Flash Off
Set Focus Off, Focus On, Focus on Trigger, or Fixed-Focus
Set the brightness setting from +2.0 EV to -2.0 EV in .5 EV increments
Switch to full screen mode
Set Camera Options, Video Options, Slide Show Options or General Options
Slide Show Tab Camera Tab Video Tab
5 - 3