Chapter 13 - Dolphin 7800 Ebase Device (Model 7800-Ehb); Overview; Unpacking The Ebase - Honeywell Dolphin 7800 User Manual

With windows embedded handheld 6.5
Hide thumbs Also See for Dolphin 7800:
Table of Contents

Advertisement

13
Dolphin 7800 eBase Device (Model 7800-EHB)

Overview

The Ethernet Base (eBase) enables a single Dolphin 7800 computer to communicate with a host device
over an Ethernet network.
The 7800-EHB charger is designed for use with standard battery pack model 7800-BTSC or 7800-
BTSCW (Li-ion 3.7 V, 8.9 watt hour) and extended battery pack model 7800-BTXC or 7800-BTXCW (Li-
ion 3.7 V, 14.8 watt hour) manufactured for Honeywell International Inc. and with Dolphin 7800 model
terminals.
Warning! The eBase is not designed for use in hazardous locations.
We recommend use of Honeywell peripherals, power cables, and power adapters. Use of any non-Honeywell
peripherals, cables, or power adapters may cause damage not covered by the warranty.

Unpacking the eBase

Open the shipping box and inspect the package to see that the following standard items are included:
• One Dolphin eBase Ethernet cradle, model 7800-EHB
• One power supply (see
• One power cord
You will also need to provide a standard CAT-5 Ethernet network cable. These items are needed to set
up and operate the eBase. If any items are missing or anything appears to be damaged, contact your
Customer Account Representative.
Keep the original packaging in case you need to return the eBase for service or to store the eBase while
not in use.
Charging Overview
The base provides power to the intelligent battery charging system in all Dolphin terminals that senses
when a full charge has been achieved and switches to a trickle charge to maintain the full charge. The
base completes a full charge of the main battery pack installed in the terminal seated in the terminal well
in 4 hours for the standard battery or 6 hours for the extended battery. The base completes a full charge
of the battery pack in the
hours for the extended battery.
Note: Before attempting to use, charge, or replace the battery in the terminal, you should read the
Battery Pack Use and Disposal
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in
damage not covered by the warranty.
Convenient Storage
The intelligent battery charging system makes this base a safe and convenient storage receptacle for
your Dolphin terminal.
Power
on page 13-4)
Auxiliary Battery Well
(see page 13-2) in 4 hours for the standard battery or 6
on page 3-13.
Guidelines for
13 - 1

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents