Sony TRINITRON KV-20FS120 Service Manual page 91

TV and Satellite Receiver
Satellite Receiver
1
Satellite
antenna
cable
1
Connect the cable from your satellite antenna to SATELLITE IN on your satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the VHF/UHF jack on
your TV.
3
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your TV.
To watch video programs from your Satellite receiver, tune your TV to channel 3 or 4.
Optional Connection
For better picture quality, use S VIDEO instead of the yellow audio/video cable.
S-VIDEO does not provide sound; the audio cables must still be connected.
S-VIDEO is only for KV-24FS120 model.
You can use the
10
From cable/
antenna
2
3
button to switch between the VHF/UHF and VIDEO inputs.
Rear of TV
Video (yellow)
Audio L (white)
Audio R (red)