Utilities; Scan - Motorola CM340 User Manual

UTILITIES

The utilities described below are programmed into
your radio by your dealer and are accessible via a
programmable button.

SCAN

You can monitor several channels in order to
receive any call that is transmitted on any of these
channels. Eight different channels can be
programmed into each scan list. Each channel can
share the same scan list or have different scan lists
assigned to them.
Once the radio's scan operation is activated and the
radio detects a call coming through a channel in its
scan list, it switches to that channel for you to
receive the call.
Starting or Stopping Scan
You can start or stop a scan operation by using a
pre-programmed Scan button either when the radio
is in the IDLE STATE or when in a call.
Using the Scan Button
1. Press the Scan button to start scanning. The
scan start alert tone
.
2. Press the Scan button again to stop
scanning. The scan stop alert tone
will sound.
The scan start alert tone will sound and the Green
LED indicator will blink during a scan operation.
When a call on a channel is detected the LED will
stop blinking and the channel number will be
displayed.
Priority Channel
A scan list may contain a priority channel. This
means that a particular channel (for example, a
commonly used channel) may be checked more
frequently than other channels in the list during a
scan operation. Priority channels are programmed
into your radio scan lists by your dealer.
Talkback
If the programmable Talkback option is set, you can
respond to any calls received during the scan
operation by pressing the PTT button before the
programmed hang-time ends. Check with your
dealer for details.
will sound
English
17