Call Forward - Motorola CM340 User Manual

Deleting a Nuisance Channel
If a channel continually generates unwanted calls/
noise (a "nuisance" channel), you can temporarily
remove it from the scan list by performing a
Nuisance Channel Delete operation:
1. While the radio is on the Nuisance Channel,
press the Nuisance Delete button until you
hear the scan start alert tone.
Note: You cannot perform a Nuisance Channel
Delete on a priority channel or if there is only
one remaining channel in the scan list.
Adding A Deleted Nuisance Channel Back
Into The Scan List
1. Press the Scan button to stop scanning. The
scan stop alert tone will sound.
2. Press the Scan button again to re-start scan-
ning. The scan start alert tone will sound, and
the scan list will contain all programmed chan-
nels.
English 18

CALL FORWARD

You can call forward calls to your radio to another
radio if you are unable to take calls or are away from
your radio.
You can switch Call Forward On or Off by using a
pre-programmed Call Forward button.
Press the Call Forward button to switch on
1.
Call Forward, when the feature enable alert
tone will sound.
2. Press the Call Forward button again to switch
off Call Forward when the feature disable alert
tone will sound.