Lamp information
Getting to know the lamp hour
When the projector is in operation, the duration (in hours) of lamp usage is automatically
calculated by the built-in timer.
To obtain the lamp hour information:
1.
Press MENU/EXIT and then press
Advanced menu.
2.
Press
Settings page appears.
3.
You will see the Equivalent Lamp information displaying on the menu.
4.
To leave the menu, press MENU/EXIT.
You can also get the lamp hour information on the INFORMATION menu.
Extending lamp life
The projection lamp is a consumable item that normally can last up to 3000-4000 hours
with proper usage. To keep the lamp life as long as possible, you can do the following
settings via the OSD menu.
•
Setting the Lamp Mode
Setting the projector in Economic or SmartEco mode extends the lamp operation life.
To set Economic or SmartEco mode, go into the SYSTEM SETUP: Advanced >
Lamp Settings > Lamp Mode menu and press
Lamp mode Description
Normal
Economic
SmartEco
•
Setting Auto Power Off
This function allows the projector to turn off automatically if no input signal is detected
after a set period of time to prevent unnecessary waste of lamp life.
To set Auto Power Off, go into the SYSTEM SETUP: Basic > Operation Settings
> Auto Power Off menu and press
your presentation, select Disable. The projector will not automatically shut down in a
certain time period.
48
Maintenance
to highlight Lamp Settings and press MODE/ENTER. The Lamp
Provides full lamp brightness
Lowers brightness to extend the lamp life and decreases the fan noise
Adjusts the lamp power automatically depending on the content brightness
level
/
to highlight the SYSTEM SETUP:
/
.
/
. If the preset time lengths are not suitable for