Cub Cadet RZT-S Professional Shop Manual page 49

For Discount Cub Cadet Parts Call 606-678-9623 or 606-561-4983
Figure 4.43
Bowtie clip
Main brake rod
Figure 4.44
Reverse switch
Screws
Figure 4.45
www.mymowerparts.com
12. Remove the bolt that is pressing against the left con-
Bolt
NOTE: This bolt is used to limit the side to side movement
13. Remove the bowtie clip and disconnect the main
14. Remove the reverse switch. See Figure 4.45.
15. Remove the two screws that hold the left control
Brakes and Drive System
trol pedal shaft bracket and its nut using a pair of 9/
16" wrenches. See Figure 4.43.
of the control pedal shaft assembly. If the mowers
was built prior to March 22, 2012 or has a shorter
bolt that does not press against the control pedal
bracket, replace it with a 3/8-16 x 2.50" grade 5
bolt (710-0859). See Service Advisory CC-749.
brake rod. See Figure 4.44.
pedal bracket to the frame using a 1/2" wrench.
43