Philips Royal Gran Crema HD8920 Operating Instructions Manual page 56

ENGLISH
54
DESCALING
STEP 1/2 DESCALING
PAUSE
DESCALING
RINSE TANK &
FILL WITH FRESH WATER
DESCALING
EMPTY DRIP TRAY
DESCALING
PLACE A CONTAINER
UNDER
DISPENSING SPOUTS
DESCALING
STEP 2/2 RINSING
PAUSE
8 The machine will start dispensing the descaling solution at regular
intervals. The bar on the display shows the cycle progress.
Note:
to empty the container during the process and to pause the descaling
cycle, press the " " button. To resume the cycle, press the "
9 The message indicates the end of the fi rst step. The water tank needs
to be rinsed. Fill the water tank with fresh water up to the MAX level.
Press the " " button.
10
Empty the drip tray and place it back, then press the "
11
Empty the container and place it back under the dispensing spout and
the hot water/steam wand. Press the "
12
The rinse cycle is activated. The bar shows the cycle progress.
13 When the amount of water needed for the rinse cycle has been
completely dispensed, the machine automatically ends the descaling
process by showing this display after a short warm-up phase.
14
Remove and empty the container.
" button.
" button.
" button.