6
Let the brew group air-dry thoroughly.
7
Lift the rear side of the inner drawer to unlock it.
8
Take out the inner drawer, wash it and place it back in its seat.
Note:
when fi tting the drawer, carry out the same operations performed for its
removal, but in reverse order.
9
Gently pull down the lever until it touches the brew group base and
the two reference signs on the side of the brew group do match.
10
Make sure brew group locking hook is correctly positioned by fi rmly
pressing the "PRESS" button until it locks into place. Check if the hook is
at the top end position. If it is not, please try again.
ENGLISH
43
43