Joystick Calibration - Samsung SPC-2010 User Manual

JOYSTICK CALIBRATION

1. Press [4] on the number pad.
2. Hold down the [SETUP] button to enter the Joystick Calibration mode.
3. At each option, move the joystick as far as you can, and then press the [ENT] button to calibrate.
[ J O Y S T I C K C A L I . ]
1. PTZ OFFSET **
Joystick in the Center
[ J O Y S T I C K C A L I . ]
4. TILT UP ***
Move to the far
upper side
[ J O Y S T I C K C A L I . ]
7. ZOOM TELE ***
Rotate to the Tele
direction as far as
possible
[ J O Y S T I C K C A L I . ]
2. PAN LEFT ***

Move to the far left
side
[ J O Y S T I C K C A L I . ]
5. TILT DOWN ***

Move to the far
lower side
[ J O Y S T I C K S A V E ]
<NO> YES

Select <YES> to save the changes and move back to the initial screen.
Select <NO> or press the [ESC] button to cancel changes and move back to the
initial screen.
[ J O Y S T I C K C A L I . ]
3. PAN RIGHT ***

Move to the far
right side
[ J O Y S T I C K C A L I . ]
6. ZOOM WIDE ***

Rotate to the Wide
direction as far as
possible


English _31