using the menu
CONTROLLING DVR
Depending on the model, the DVR may have different features available.
For details, refer to the applicable user manual.
M
An improper setting may cause a problem using the DVR.
To enter DVR control mode
Press [PTZ/DVR] button to switch to DVR control mode.
To select a DVR
1. Use the number buttons to enter a DVR number (0~255) and press [ENT].
2. Screen according to the selected DVR model appears.
M
PTZ control synchronizes to the settings configured in the selected DVR. When changed PTZ settings of the DVR,
select the DVR as instructed above to refresh synchronization to changed settings.
To select a DVR channel
1. Use the number buttons to enter the number for a desired DVR channel.
2. Press [CAM].
M
Hold [FUNC] button and select a channel's number button to switch to the desired DVR channel. (Channel 1 ~ 9)
Controlling the DVR Spot Monitor
If using DVR that supports Spot Out, press the buttons below in a row to control Spot Out.
• To switch selected DVR's Spot channel to a desired camera's video:
SPOT monitor number + [MON] + Channel number + [CAM]
• To switch selected DVR's Spot channel to a desired DVR's split screen mode:
SPOT monitor number + [MON] + [MODE]
24_ using the menu