Connecting The Ptz Camera - Samsung SPC-2010 User Manual

Connecting the PTZ Camera

By connecting RS-485 port on the rear of the PTZ camera with Tx of SPC-2010, you can control the
camera.

M Depending on the camera, the polarity may differ.
For more information, refer to the user manual of the PTZ camera.
For the half duplex system
- Connect Rx (+) of RS-485 port of the PTZ camera with TRx (+) of SPC-2010.
- Connect Rx (–) of RS-485 port of the PTZ camera with TRx (–) of SPC-2010.

If connecting a PTZ camera without using DVR device, you can connect to Tx1, Tx2 or Tx3 instead of TRx.
Tx1 Tx2 Tx3 TRx
Tx1 Tx2 Tx3 TRx
Tx1 Tx2 Tx3 TRx
English _15