Brother MFC-8460N Service Manual page 334

Error Code
(Hex)
BF Duplex scanning cannot be
implemented due to too long
document
C1-CF Not used.
D0-DF Modem error
E0-E5 Not used.
E6 Write error in EEPROM
E7 Not used.
E8 Data scanning error during
transmission.
E9 Not used.
EA Document removed at phase
B.
EB-FF Not used.
Symptom
9-11
Probable Cause
Document front sensor 2
defective
Main PCB defective
Main PCB defective
Main PCB defective
CCD unit defective
Main PCB defective
Document front sensor
actuator does not move
smoothly.
ADF relay PCB defective
Document front sensor
defective
Main PCB defective
Solution
Replace the document
front sensor 2.
Replace the main PCB.
Replace the main PCB.
Replace the main PCB.
Replace the CCD unit.
Replace the main PCB.
Set the document front
sensor actuator into place.
Replace the ADF relay
PCB.
Replace the document
front sensor.
Replace the main PCB.
Confidential