Brother MFC-8460N Service Manual page 256

(26) Remove the two cup B M4x20 Taptite screws. Lift up the rear of the Scanner unit FLFB
slightly and remove the Scanner unit FLFB.
Taptite, cup B M4x20
26a
Hook
(27) Remove the cup S M3x6 SR Taptite screw, and remove the Screw pan (S/P washer) M3.5x6
of the NCU FG harness ASSY ALFB.
Screw pan (S/P washer) M3.5x6
NCU FG harness ASSY ALFB
Joint cover
Driver PCB shield ALFB
Taptite, cup S M3x6 SR
Taptite, cup B M4x20
Fig. 6-17
Fig. 6-18
6-11
Scanner unit FLFB
26b
NCU unit
Hook
Confidential