Symbols - Ryobi RY43200 Operator's Manual

The following signal words and meanings are intended to explain the levels of risk associated with
this product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL
Safety Alert Symbol
Read Operator's Manual
Wear Eye and Head
Protection
Keep Tool Away from Electri-
cal Lines/Keep Bystanders
Away
Wet Conditions Alert
Bar Nose Contact
No Hands Symbol
Operate With Two Hands

SYMBOLS

MEANING
Indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates important information not
related to an injury hazard, such as a situation that may result in
property damage.
NAME
Avoid bar nose contact.
Hold and operate the lopper properly with both
hands.
Page 6 — English
EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and
understand operator's manual before using this
product.
Always wear eye protection with side shields
marked to comply with ANSI Z87.1, along with
head protection.
DANGER! Risk of electrocution! Keep tool 50 feet
away from electrical lines. Keep all bystanders at
least 50 ft. away.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from the blade will
result in serious personal injury.