Table of Contents
Advertisement
Indicators
3
Delay button
4
Indicators
Programmes
1)
Programme
2)
3)
4)
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the
programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.
Before first use
1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
4
Washing phase indicator.
Drying phase indicator.
End indicator.
Salt indicator. This indicator is off while the programme operates.
Degree of soil
Type of load
Heavy soil
Crockery, cutlery,
pots and pans
Normal soil
Crockery and cutlery
Fresh soil
Crockery and cutlery
Normal soil
Crockery and cutlery
All
Start button
5
Programme knob
6
Programme phases
Prewash
Wash 70 °C
Rinses
Dry
Prewash
Wash 65 °C
Rinses
Dry
Wash 65 °C
Rinse
Prewash
Wash 50 °C
Rinses
Dry
Prewash
adjust the water softener. Contact your local water au-
thority to know the water hardness in your area.
2. Fill the salt container.
Description
Duration
Energy
(min)
(kWh)
85-95
1,8-2,0
100-110
1,4-1,6
30
0,9
130-140
1,0-1,2
12
0,1
Water
(l)
22-25
19-21
9
14-16
5
Advertisement
Table of Contents
