Special Calls; Short Data Messages (Sdm); Receiving Short Data Messages; Storing Sdms - Motorola GP-688 Manual

SPECIAL CALLS

Short Data Messages (SDM)

Short data messages may be set up, sent and
received using the radio keypad and controls.
Outgoing data messages from the keypad are
limited to alphanumeric data in any
combination of up to 20 characters (which
include address information and data selection
characters).

Receiving Short Data Messages

On receiving a Short Data Message:
Tone G sounds
1
The data message icon
SDMs are in the data message calls list. Note
that the data message icon flashes when data
messages in the calls list are unread. The icon
is lit permanently when a message is read and
retained in the calls list.
English 36
Data Received
K
is lit whenever

Storing SDMs

Incoming SDMs are stored on receipt in the
Short Data Message Calls List. Up to ten
SDMs can be stored by the radio. The data
K
message icon is lit whenever SDMs are in
the calls list.
SDMs are not stored when the radio is
switched OFF, except for one SDM only which
can be saved.

Interrogating the SDM Calls List

When an SDM call has been stored by the
radio, the display will show:
Data Received
With the display showing 'Data Received' ,
pressing any of the menu buttons provides a
quick access into the Data Calls List.