ZyXEL Communications ZyWALL USG 20 User Manual page 9

Step 8. Fill in the 3G connection parameters:
- The card information will be detected by device automatically
- ISP Settings

APN name

Dial String
- PIN code
Step 9. After the configuration is done, click Activate to enable the rule. And
then click Connect button to enable the 3G connection.
Step 7. Go to the dashboard and click the Dial button to trigger the rule. User
can check the 3G WAN interface status to get the 3G modem detail
information.
Step 8. Now the both PPPoE and 3G connection are UP. Click on Network >
WAN > General page to select the Active/Passive Mode to achieve the
backup mechanism.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
ZyXEL
– ZyWALL USG Support Notes
9