ZyXEL Communications ZyWALL USG 20 User Manual page 7

Step 4. Enable the interface and select the pre-configured ISP account to
activate the PPPoE rule.
Step 5. When the configuration is done, click the Connect button to enable
the PPPoE link. Once the connection is established, the connected icon will
be displayed in front of the rule.
Step 4. Check the connection status on the dashboard.
Step 5. Click Network > WAN > 3G (WAN2) to open the configuration screen.
All contents copyright (c) 2010 ZyXEL Communications Corporation.
ZyXEL
– ZyWALL USG Support Notes
7