ZyXEL Communications ZyWALL USG 20 User Manual page 37

ZLD configuration
Step 1. Click CONFIGURATION > VPN > IPSec VPN > VPN Gateway to open
the configuration screen.
Step 2. Click the Add button to add a VPN gateway rule.
Step 3. To configure the VPN gateway rule, user needs to fill in:
- VPN gateway name
- Gateway address; both local (My Address) and peer (Dynamic Address)
- Authentication setting

Pre-Shared Key

ID Type setting (Local and Peer side)
- Phase-1 setting

Negotiation mode

Encryption algorithm

Authentication algorithm

Key Group
Step 1. Click SECURITY > VPN > VPN RULES (IKE) to open the configuration
screen.
Step 2. Click the Add button to add a gateway policy.
Step 3. To configure the gateway policy, user needs to fill in:
- Policy name
- Gateway information; both local (My ZyWALL) and peer ("0.0.0.0" for
dynamic access)
- Authentication setting
- Configure the IKE proposal
All contents copyright (c) 2010 ZyXEL Communications Corporation.
ZyXEL
ZyNOS configuration

Pre-Shared Key

ID Type setting (Local and Peer side)

Negotiation mode

Encryption algorithm

Authentication algorithm

Key Group
– ZyWALL USG Support Notes
37