Sony Walkman WM-GX688 Operating Instructions Manual page 59

To operate from the
remote control
To turn on the radio, press
RADIO ON/BAND•OFF for
more than one second (while the
tape is in stop mode only).
To select the band, press RADIO
ON/BAND•OFF for more than
one second while the radio is on.
To tune in or recall a preset
station, press PRESET+ or –.
To turn off the radio, press
RADIO ON/BAND•OFF.
Tuning in to the
Ready-preset
Stations for Each
Area (Manual Area
Call)
For each of the nine areas in
Japan (Sapporo, Sendai,
Northern Kanto, Southern
Kanto, Nagoya, Osaka,
Hiroshima, Fukuoka and the
Shinkansen), this Walkman is
factory preset with frequency
data for major stations receivable
in the area. Once your present
area is selected, you can tune in
to the stations on the area by
preset tuning. For the factory
preset stations for each area, see
pages 30 to 31 of the Japanese
text.
1
Press RADIO ON/BAND
to turn on the radio.
2
Press ENTER. The
frequency digits will flash
in the display.
3
Hold down RADIO ON/
BAND until "AREA 1"
flashes.
4
While "AREA 1" is
flashing, press TUNE/
PRESET+ or – repeatedly
to select and area number
from 1 to 8 or "JR" and
then press ENTER.
5
Tune in to the desired
preset station by "preset
tuning" (see "Listening to
the Radio").
59