Sony Walkman WM-GX688 Operating Instructions Manual page 53

Hide thumbs Also See for Walkman WM-GX688:
Table of Contents

Advertisement

* Measured value by the standard
of EIAJ (Electronic Industries
Association of Japan). (Using a
Sony HF series cassette tape)
**When using a Sony LR6 (SG)
"STAMINA" alkaline dry battery
(produced in Japan).
Note
• The battery life may be shorter
depending on the operating
condition, the surrounding
temperature and battery type.
House Current
Remove the rechargeable battery
if inserted. Attach the battery
case and connect the AC power
adaptor AC-E15L for Japan (not
supplied) or AC-E15HG (not
supplied) to the DC IN 1.5 V jack
of the battery case and to the
wall outlet.
Do not use any other AC power
adaptor.
Specifications for AC-E15HG
vary for each area. Check your
local voltage and the polarity of
the plug before purchasing.
Polarity of the plug
Playing a Tape
1
Insert a cassette and if the
HOLD function is on,
slide the HOLD switch in
the opposite direction of
the arrow to unlock the
controls.
2
Press Y(play)•x(stop)
on the remote control and
adjust the volume with
VOL. (On the main unit,
press Y•REPEAT.)
When adjusting the volume
on the main unit
Set the VOL control on the remote
control at maximum.
When adjusting the volume
on the remote control
Set the VOL control on the main
unit to around 6.
53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents