Sony Walkman WM-GX688 Operating Instructions Manual page 55

A-B Repeat
A-B Repeat plays back
repeatedly any portion of the
tape you specified. Specify by
tagging the beginning (point A)
and the end (point B) of the
portion during playback.
On the remote control
1 Press Y•x for 2 seconds or
more during playback to tag
point A.
"A-" will flash in the display
of the main unit.
2 Press Y•x again to tag
point B.
"A-B" will flash and the tape
will be rewound to point A.
Then "REP" appears in the
display and the specified
portion is played repeatedly.
On the main unit
1 Press Y•REPEAT for 2
seconds or more during
playback to tag point A.
"A-" will flash in the display
of the main unit.
2 Press Y•REPEAT again to
tag point B.
"A-B" will flash and the tape
will be rewound to point A.
Then "REP" display and the
specified portion is played
repeatedly.
To cancel the A-B Repeat
playback
Press Y•REPEAT on the main
unit.
On the remote control, press
Y•x.
Notes
• You cannot specify a repeat
portion to include both sides of
the tape.
• You cannot specify a repeat
portion of shorter than 2 seconds.
• After repeated operation, the
actual portion that is played back
may shift off somewhat from the
exact portion specified with the
tags due to tape slack.
• A-B Repeat will repeat 50 times
before returning to normal
playback if not canceled
manually.
• Do not use the A-B Repeat
function with tapes longer than
90 minutes. If you do, the tape
may be damaged.
55