Audio Menu - Hitachi CP-X600 Operating Manual

AUDIO Menu

AUDIO Menu
From the AUDIO menu, items shown in the table below can
be performed.
Select an item using the ▲/▼ cursor buttons on the
projector or remote control, and press the ► cursor button
on the projector or remote control, or ENTER button on
the remote control to execute the item. Then perform it
according to the following table.
NOTE • The speaker sound may distorted or the case may be trembling
when the volume is too high or treble/bass is emphasized or WOW is activated.
In that case, make the volume reduced, bass/treble low or WOW effect to be
weakend.
Item
VOLUME
SPEAKER
AUDIO
36
Using the ▲/▼ buttons adjusts the volume.
High ó Low
Using the ▲/▼ buttons turns the speaker function on/off.
TURN ON ó TURN OFF
• When the TURN ON is selected the built-in speaker works.
Allocates the audio ports.
(1) Choose a picture input port using the ▲/▼
buttons.
RGB ó RGB
VIDEO ó S-VIDEO ó COMPONENT
() Select the audio port to be interlocked with
the input port using the ◄/► buttons.
 ó  ó 3 ó 4 ó
When is selected to an input port, any audio ports do not work
interlocking with the input port, and any items in AUDIO menu are
invalid.
Description