Temporarily Blanking The Screen - Hitachi CP-X600 Operating Manual

Temporarily blanking the screen

.
Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen
of input signal. Please refer to the BLANK item in SCREEN
menu
(37).
To exit from the blank screen and return to the input signal screen, press the
BLANK button again.
● The projector automatically returns to the input signal screen when one of
the projector's buttons or the remote control buttons is pressed or one of the
commands (except get commands) is transmitted to the control port.
NOTE • The sound is not connected with the blank screen function. If
necessary, set the volume or mute first.
Operating
SEARCH
VIDEO RGB
BLANK
ASPECT AUTO
MAGNIFY
PAGE UP VOLUME
HOME
ON
PAGE DOWN MUTE
END
OFF
FREEZE MY BUTTON KEYSTONE
1 2
POSITION MENU
ENTER
ESC RESET