Adjusting The Zoom And Focus; Using The Automatic Adjustment Feature - Hitachi CP-X600 Operating Manual

Operating

Adjusting the zoom and focus

.
Use the zoom ring to adjust the screen size.
.
Use the focus ring to focus the picture.

Using the automatic adjustment feature

.
Press the AUTO button on the remote control.
 For an RGB signal
The vertical position, the horizontal position, the horizontal
phase and the horizontal size will be automatically adjusted.
And the aspect ratio will be automatically set to default. Make sure that the
application window is set to its maximum size prior to attempting to use this
feature. A dark picture may still be incorrectly adjusted. Use a bright picture
when adjusting.
 For a video signal or s-video signal
The video format best suited for the respective input signal will be selected
automatically.
This function is available only when the AUTO is selected to the VIDEO
FORMAT item in INPUT menu
signal type is identified automatically independently of this function.
 For a video signal, s-video signal or component video signal
The vertical position, horizontal position and aspect ratio will be automatically
set to default.
 For a component video signal
The horizontal phase will be automatically set to default.
● The automatic adjustment operation requires about 10 seconds. Also please
note that it may not function correctly with some input.
8
. For a component video signal, the
(31)
Zoom ring
Top
VIDEO
ASPECT
MAGNIFY
ON
OFF
FREEZE
POSITION
ESC
Focus ring
SEARCH
RGB
BLANK
AUTO
HOME PAGE UP VOLUME
END PAGE DOWN MUTE
MY BUTTON
KEYSTONE
1 2
MENU
ENTER
RESET