Westerbeke 20.0KW sbeg Operator's Manual page 9

EMISSIONS
This geoset meets the requirements of California's Exhaust
Emissions Standards as stated on the nameplate.
You should carefully review operator (Owner) Installation
and other manuals and information you receive with your
gense!. If you are unsure that the installation, use,
maintenance or service of your genset is authorized, you
should seek assistance from an approved WESTERBEKE
dealer.
Califomia users of this genset should be aware that
unauthorized modifications or replacement of fuel, exhaust,
air
intake, or speed control system components that affect
engine emissions are prohibited. Unauthorized modification,
removal or replacement of the engine label is prohibited.
Federal Emilsions Compliance Period: The Federal
Emissions Compliance Period referred to on the nameplate
indicates the number of operating hours for which the engine
has been shown to meet Federal Emissions requirements.
Catagory C= 250 hrs, B=500 hrs,m A =lOOO.hrs.
California genset users may use the table below as an aid in
locating information related to the California Air Resources
Board requirements for emissions contro1.
EMISSIONS CONTROL INFORMATION TABLE
The California emissions control warranty statement is located in the same
Emissions Warranty Information
packet, if information as this manual when the genset is shipped from the
factory.
Engine Fuel Requirements The engine is certified to operate on unleaded gasoline. See
FUEL
RECOMMENDATIONS.
Engine Valve Adjusbnent See
MAINTENANCE SCHEDULE.
Engine Ignition Timing See
MAINTENANCE SCHEDULE.
Engine Lubricating Oil Requirements See
ENGINE OIL RECOMMENDATIONS.
Engine Adjusbnents ECU.
Engine Emission Contol System The engine emission control system consists of engine design and precision
manufacture.
Catalyst
See
MAINTENANCE SCHEDULE.
Oxygen Sensor See
MAINTENANCE SCHEDULE.
Back Pressure See
MAINTENANCE SCHEDULE.
~
WESTERBEKE
Engines & Generators
vi